Subscribe to SYN Shop - All comments

March 2019

31 Mar 2019

SYN Shop Project Night - Open Night

By Automated Importer

Tuesday Apr 2, 2019 6:00 pm

We're looking to make SYN Shop more awesome, so we've decided that Tuesday would be the perfect night to host a community project night.  It's an open night where we can work on projects to improve SYN Shop.  This is your night to make your local hackerspace even better.

https://www.meetup.com/synshop/events/260135157/

29 Mar 2019

ShopBot Like A Boss (Members Only)

By Automated Importer

Sunday Mar 31, 2019 2:00 pm

This is a free class for paying SYN Shop members only.  Due to space and time constraints we can only accommodate up to four people at a time around the ShopBot.

Looking to get started in the wonderful worlds of CNC routing?  Looking to learn more about the ShopBot so you can understand more about it, other than it being a tool that somehow you put plywood into and furniture comes out.  This is an introduction to running the ShopBot, the CNC sheet router, we have at SYN Shop. 

https://www.meetup.com/synshop/events/259712739/

27 Mar 2019

Open Source and Security Night with the Greynoi.se Podcast

By Automated Importer

Friday Mar 29, 2019 6:00 pm

We start our information security night off by just gathering and discussing what has gone on during our weeks and a general night to work on open source software and security.

At 7:30pm is when the podcast recording with the Greynoi.se podcast starts. All who come are welcome to sit in on the podcast or work on their projects as they would any other SYN Shop open night. The podcast hosts also setup a mic that is off camera if you would like to chime in on what is being discussed, or you would like to fact check them on the fly.

https://www.meetup.com/synshop/events/260020836/

26 Mar 2019

Milling Machine Training (Members Only)

By Automated Importer

Wednesday Mar 27, 2019 6:00 pm

This is a free class for paying SYN Shop members only. Due to space and time constraints, we can only accommodate up to five people at a time around the equipment.

This event is to go over all info, training, and general safety of operating the Milling Machine equipment at the SYN Shop.

https://www.meetup.com/synshop/events/259489776/

23 Mar 2019

SYN Shop Project Night - Open Night

By Automated Importer

Tuesday Mar 26, 2019 6:00 pm

We're looking to make SYN Shop more awesome, so we've decided that Tuesday would be the perfect night to host a community project night.  It's an open night where we can work on projects to improve SYN Shop.  This is your night to make your local hackerspace even better.

https://www.meetup.com/synshop/events/259947272/

22 Mar 2019

Paid Members Only: Danger Room Tools and Shop Orientation

By Automated Importer

Saturday Mar 23, 2019 3:00 pm

Test

Join Richard as he quickly covers the major tules in the Danger room, and the Major Rules for safety in the danger room. This is a critical subject, and if you spend any time in the Danger Room, you should attend at least one. This class will shift the specific days of the week it is held on to get as much coverage to the membership as possible.

https://www.meetup.com/synshop/events/259712694/

19 Mar 2019

Open Source and Security Night with the Greynoi.se Podcast

By Automated Importer

Friday Mar 22, 2019 6:00 pm

We start our information security night off by just gathering and discussing what has gone on during our weeks and a general night to work on open source software and security.

At 7:30pm is when the podcast recording with the Greynoi.se podcast starts. All who come are welcome to sit in on the podcast or work on their projects as they would any other SYN Shop open night. The podcast hosts also setup a mic that is off camera if you would like to chime in on what is being discussed, or you would like to fact check them on the fly.

https://www.meetup.com/synshop/events/259834716/

18 Mar 2019

SYN Shop Project Night - Open Night

By Automated Importer

Tuesday Mar 19, 2019 6:00 pm

We're looking to make SYN Shop more awesome, so we've decided that Tuesday would be the perfect night to host a community project night.  It's an open night where we can work on projects to improve SYN Shop.  This is your night to make your local hackerspace even better.

https://www.meetup.com/synshop/events/259751782/

15 Mar 2019

Paid Members Only: Danger Room Tools and Shop Orientation

By Automated Importer

Monday Mar 18, 2019 7:00 pm

Join Richard as he quickly covers the major tules in the Danger room, and the Major Rules for safety in the danger room. This is a critical subject, and if you spend any time in the Danger Room, you should attend at least one. This class will shift the specific days of the week it is held on to get as much coverage to the membership as possible.

https://www.meetup.com/synshop/events/259712663/

14 Mar 2019

Open Source and Security Night with the Greynoi.se Podcast

By Automated Importer

Friday Mar 15, 2019 6:00 pm

We start our information security night off by just gathering and discussing what has gone on during our weeks and a general night to work on open source software and security.

At 7:30pm is when the podcast recording with the Greynoi.se podcast starts. All who come are welcome to sit in on the podcast or work on their projects as they would any other SYN Shop open night. The podcast hosts also setup a mic that is off camera if you would like to chime in on what is being discussed, or you would like to fact check them on the fly.

https://www.meetup.com/synshop/events/259635380/

Pages