Subscribe to SYN Shop - All comments

November 2015

Wednesday Dec 2, 2015 6:00 pm

Let's get together and work on crafts! While this night is focused on the crafting disciplines, everyone is welcome to show up and hang out. Bring whatever project you are working on, or just come and see what everyone else is working on.

Saturday Nov 28, 2015 2:00 pm

This is our Monthly Board Meeting where the board conducts it's normal business. All members are encouraged join and provide input into the running of the space.

Friday Nov 27, 2015 6:00 pm

Podcast recordings with the Gr3y Noise podcast and a general night to work on open source software and security. All who come are welcomed to sit in on the podcast, or, work on their projects as they would any other syn shop open night.

Sunday Nov 22, 2015 5:00 pm

Ref StartUp Weekend Come for final pitches Sunday night UNLV Beam Hall (BEH)
4505 S. Maryland Pkwy Room #228 Upstairs..Building next (westside) to Student Union Free Parking ...Visit
... Definitely Come Sunday night after dinner at 5pm (bring your older teenagers) and hear the final pitches ... in front of Judges...Hear their comments... and decision. No cost.

Wednesday Nov 25, 2015 6:00 pm

Let's get together and work on crafts! While this night is focused on the crafting disciplines, everyone is welcome to show up and hang out. Bring whatever project you are working on, or just come and see what everyone else is working on.

Saturday Nov 21, 2015 10:00 am

Join Instructor Stan Hanel as he gives an introduction to electronics in a class that mixes hands-on and lecture. We will study electromagnetic components while also learning how to solder electronic components onto a printed circuit board:

Each student will leave with a personally built electronics kit. This Class's kit is a motor control box. 

Friday Nov 20, 2015 6:00 pm

Podcast recordings with the Gr3y Noise podcast and a general night to work on open source software and security. All who come are welcomed to sit in on the podcast, or, work on their projects as they would any other syn shop open night.

Thursday Nov 19, 2015 7:00 pm

*** Open to folks at ALL Skill levels***


At DEFCON, and other conferences, having a special blingy/blinky badge that only you and only a few other people have will auto-magicly increase your street cred. 

This meetup is to plan coordinate and eventually fabricate the creation of a SYNSHOP specific hardware conference badge. Come with your hardware know-how, art knowledge, or a willingness to learn so we can share good ideas, and be ready to help make something cool.

When using the laser cutter last night i found for some reason even though the lines were aligned on my file to the extent at wich i could align them with the inkscape program they seemed even more off when cutting. This might be due to the cutting width or it might need to be compensated by aligning the stroke to the inside of the path. Other than that the test runs for my portfolio went well so hopefully there is a solution. I have not found one online that deals with such a thing yet.

Thursday Nov 19, 2015 7:00 pm

Join Richard as he quickly covers the major tules in the Danger room, and the Major Rules for safety in the danger room. This is a critical subject, and if you spend any time in the Danger Room, you should attend at least one. This class will shift the specific days of the week it is held on to get as much coverage to the membership as possible.

Pages